Abstract
Know a day’s utilization of local accessible materials is an important stage for sustainable, economic building material on the earth surface. Within them Brick is one of the commonly used construction material around Jimma town due to the availability of clay soil. But brick produced by small micros un-skill enterprises rather than by traditional method, its quantity was small and its quality was unsatisfactory, because it can easily break and it has high water absorbing conduct. The purpose of investigation was be to improving the properties of clay soil properties by using Literate soil for in the manufacturing of bricks for masonry units. In order to achieve this researches include, non-probability sampling techniques was be used to collect samples in Jimma area, then collected of samples prepared for different laboratory test and by partially replacing literate soil by 5%, 10%, 15% and 20% on a clay soil in order to get optimum property by different mix ration for different laboratories. Test results indicated that shows that the lightweight bricks could be made from this study without any deterioration in the quality of bricks. Additionally, the compressive strength of the blocks optimum at 15% lateritic soil replace in clay soil contents. The optimum firing temperature furnace at a duration burning of brick was at 1000°C. It’s shown that bricks prepared of clay-laterite earth capable for high resisting capacity rather than for beauty.
